基本樣品架 / BASIC SAMPLE HOLDER - TANTALUM CONTACT, 4 MM MAX. THICKNESS
H-A-BS_HOLD_Ta, H-O-BS_HOLD_Ta
Basic Sample Holder with a Tantalum contact works as an electrical conductor between an electrode material (free-standing or deposited on a substrate) and an external circuit. This holder consists of PEEK body, pure Tantalum metal electrical contact and PEEK screw to fix the electrode. It is compatible with most of inorganic and organic based plates, free-standing membranes or thin films deposited on flexible and rigid substrates.
MORE
樣品支架 / SAMPLE HOLDER 15 MM X 15 MM
15 mm x 15 mm
The sample holder (also known as flat specimen holder) is used for holding flat, circular or square/rectangular samples. It enables contacting the sample from the front (e.g. ITO/FTO glass, Monolayer Graphene on SiC, or Boron-Doped Diamond thin film on various substrates) and from the back (e.g. metal specimen, Glassy Carbon plate, Boron-Doped Diamond plate).
MORE
樣品支架 / SAMPLE HOLDER 25 MM X 25 MM
H-A-S_HOLD-25x25, H-O-S_HOLD-25x25
The sample holder (known also as flat specimen holder) is used for holding flat, circular or square/rectangular samples. It enables contacting the sample from the front (e.g. ITO/FTO glass, Monolayer Graphene on SiC, or Boron-Doped Diamond thin film on various substrates) and from the back (e.g. metal specimen, Glassy Carbon plate, Boron-Doped Diamond plate).
MORE
反電極支架 / COUNTER ELECTRODE HOLDER - MEMBRANE SEPARATION, 6 MM DIA. ELECTRODES
H-A-CE_HOLD-1, H-O-CE_HOLD-1
The counter electrode holder is used for holding a cylindrical electrode with diameter of 6 mm. It enables installation of a classical electrode in tanks of larger volumes. Moreover, it holds an ion-exchange or nanoporous membrane to separate the counter electrode from the working electrode environment. The nominal aperture (active membrane surface area) is 1cm2, but other value can be provided on request.
MORE
參考電極支架 / REFERENCE ELECTRODE HOLDER - MEMBRANE SEPARATION, 6 MM DIA. ELECTRODES
H-A-RE_HOLD-1, H-O-RE_HOLD-1
The reference electrode holder is used for holding a cylindrical reference electrode with diameter of 6 mm. It enables installation of a classical reference electrode in tanks of larger volumes in close proximity to working electrode. Moreover, it holds an ion-exchange or nanoporous membrane to separate the reference electrode from the working electrode environment and prevent leakage of ions from the liquid junction electrode.
MORE
電極適配器 / ELECTRODE ADAPTER SGJ 14/15 TO 6 MM DIA.
E-A-EA_SGJ-14/15_to_6, E-O-EA_SGJ-14/15_to_6
The electrode adapter is used for installing 6 mm dia. electrode into laboratory glassware with SGJ 14/15 port. It enables using disk electrode, plug with clip or any other rod-shape electrode (e.g. graphite rod) or current collector (e.g. metal mesh, graphite coated metal mesh, metal foil, graphite coated metal foil, metal foam, carbon woven and non-woven fabrics, carbon paper, etc.) as an electrode. The electrode adapter is made of PEEK.
MORE
用於拉曼 ECFC 的電極適配器 / ELECTRODE ADAPTER FOR RAMAN ECFC
E-A-DISK_EA_RAM_ECFC, E-O-DISK_EA_RAM_ECFC
The electrode adapter is used for installing 6 mm dia. electrodes inside Raman ECFC. It enables using disk electrode, plug with clip or any other rod-shape electrode (e.g. graphite rod) or current collector (e.g. metal mesh, graphite coated metal mesh, metal foil, graphite coated metal foil, metal foam, carbon woven and non-woven fabrics, carbon paper, etc.) as working electrode instead of a flat electrode in default Raman ECFC configuration.
MORE
電極適配器電纜 / ELECTRODE ADAPTER CABLE - 1MM DIA. F TO 4 MM DIA. BANANA F/M
E-EA_CABLE
The electrode adapter cable is used to electrically connect an electrode equipped with 1 mm dia. pin (Male) to a potentiostat having 4 mm dia. banana plug (either Male or Female).
MORE
電極適配器 / ELECTRODE ADAPTER – G1 THREAD (1’’)
E-A-RE_EA-G1
This fully customizable industrial electrode adapter is used to convert 6 mm dia. electrode to the required socket of another system. Moreover, the electrical connection is converted from 1 mm dia. pin to 4 mm dia. banana plug. The electrode which is not included in this product is an inset for that adapter. Typical electrodes are cup less Ag/AgCl 70 mm Reference Electrodes, Working Disc Electrodes and Graphite Counter Electrodes.
MORE
GAS COMPARTMENT OF GDE RAMAN ECFC / GAS COMPARTMENT OF GDE RAMAN ECFC
C-A-GDE_COMP_RAM, C-O-GDE_COMP_RAM
The Gas Compartment is used to convert screw mount variant of Raman ECFC into GDE Raman ECFC. This conversion allows installation of Gas Diffusion Electrodes as working electrode.
MORE
