產品介紹∣analogue Dri-Block
Search

analogue Dri-Block
analogue Dri-Block

【TECHNE】各類加熱器、攪拌器 Dri-Block heaters

analogue Dri-Block

簡介

analogue Dri-Block

  • Small, light, compact footprint - flat top surface allows units to be stacked in storage.
  • Can hold any combination of aluminium insert blocks, depending on the model chosen.
  • High quality, precision-engineered aluminium blocks provide excellent thermal contact.
  • Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.

我要諮詢

Introduction
Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and sensitive analytical procedures particularly suited to microbiology and clinical laboratories. They are designed for precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. Techne® Dri-Block® heaters cover the temperature range from ambient +5°C to 100°C or 200°C (depending on model) using machined aluminium alloy Dri-Block® inserts as the heat transfer medium. Independent indicator lights indicate mains power, heater action and over-temperature cut-out. An On/Off switch is mounted on the rear panel, together with the mains connector and a fuse holder.

Key Features

  • Small, light, compact footprint - flat top surface allows units to be stacked in storage.
  • Can hold any combination of aluminium insert blocks, depending on the model chosen.
  • High quality, precision-engineered aluminium blocks provide excellent thermal contact.
  • Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.

DB-2A

  • Small, light and stackable with a compact footprint.
  • Can hold up to 2 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Temperature range from ambient to 100°C.
  • Fast heat-up rate: 30°C to 100°C in just 12 minutes.
  • Temperature stability at 40°C: ± 0.05°C.

DB-3

  • The DB-3 is designed to hold up to 3 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Temperature range from ambient to 100°C.
  • Fast heat-up rate: 30°C to 100°C in just 18 minutes.
  • Temperature stability at 40°C: ± 0.05°C.

DB-3A

  • Temperature range from ambient to 200°C for higher temperature applications.
  • Can hold up to 3 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Powerful heater for fast heat-up rate: 30°C to 200°C in just 30 minutes.
  • Temperature stability at 40°C: ±0.1°C.
     

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Analogue Techne® Dri-block® heaters are aften used used in the Techne® Sample Concentrator.

 

Model DB-2A DB-3 DB-3A
Blocks 2 3 3
Temperature Setting Rotary dial Rotary dial Rotary dial
Working range Ambient +5°C to 100°C Ambient +5°C to 100°C Ambient +5°C to 200°C
Temperature Scale 2°C graduation 2°C graduation 2°C graduation
Set point accuracy ±2°C ±2°C ±2°C
Stability @ 40°C ±0.05°C ±0.05°C ±0.1°C
Stability @ 100°C ±0.1°C ±0.1°C ±0.15°C
Max variation between blocks 0.2°C at 40°C 0.2°C at 40°C 0.2°C at 40°C
Heat up 30-37°C 8 minutes 8 minutes 8 minutes
Heat up 30-56°C 12 minutes 18 minutes 30 minutes
Dimensions (WDH) 202 x 260 x 105mm 279 x 260 x 105mm 279 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz
Power 300W 450W 450W
Shipping weight 4kg 6kg 6kg
Warranty 3 years 3 years 3 years

 

Introduction
Techne® Dri-Block® heaters have been providing a safe, dry, constant temperature source in the laboratory for 50 years, offering market-leading choice, flexibility and specification. Dri-Block® heaters are a source of precision temperature control for general, routing applications and sensitive analytical procedures particularly suited to microbiology and clinical laboratories. They are designed for precise heating of test-tubes, microcentrifuge tubes, cuvettes and microtitre plates. Techne® Dri-Block® heaters cover the temperature range from ambient +5°C to 100°C or 200°C (depending on model) using machined aluminium alloy Dri-Block® inserts as the heat transfer medium. Independent indicator lights indicate mains power, heater action and over-temperature cut-out. An On/Off switch is mounted on the rear panel, together with the mains connector and a fuse holder.

Key Features

  • Small, light, compact footprint - flat top surface allows units to be stacked in storage.
  • Can hold any combination of aluminium insert blocks, depending on the model chosen.
  • High quality, precision-engineered aluminium blocks provide excellent thermal contact.
  • Versatile range of interchangeable heating blocks to fit all popular sample tubes and plates.

DB-2A

  • Small, light and stackable with a compact footprint.
  • Can hold up to 2 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Temperature range from ambient to 100°C.
  • Fast heat-up rate: 30°C to 100°C in just 12 minutes.
  • Temperature stability at 40°C: ± 0.05°C.

DB-3

  • The DB-3 is designed to hold up to 3 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Temperature range from ambient to 100°C.
  • Fast heat-up rate: 30°C to 100°C in just 18 minutes.
  • Temperature stability at 40°C: ± 0.05°C.

DB-3A

 

  • Temperature range from ambient to 200°C for higher temperature applications.
  • Can hold up to 3 aluminium insert blocks or one 96-well plate block.
  • Temperature setting is by a calibrated dial.
  • Powerful heater for fast heat-up rate: 30°C to 200°C in just 30 minutes.
  • Temperature stability at 40°C: ±0.1°C.
     

Electrical Safety
The Dri-Block® range has been designed to comply with all RF interference and electrical safety regulations.

Warranty
Techne® Dri-Block® heaters have earned a strong reputation for reliability. All instruments are supplied with a 3 year warranty. The anodised aluminium Dri-Block® inserts are supplied with a 1 year warranty.

Applications
Applications include incubation, boiling, inactivation, wet washing, sample concentration, enzyme digestions, enzyme activity studies, nucleic acid hybridisations and many other clinical and industrial purposes. Analogue Techne® Dri-block® heaters are aften used used in the Techne® Sample Concentrator.

 

Model DB-2A DB-3 DB-3A
Blocks 2 3 3
Temperature Setting Rotary dial Rotary dial Rotary dial
Working range Ambient +5°C to 100°C Ambient +5°C to 100°C Ambient +5°C to 200°C
Temperature Scale 2°C graduation 2°C graduation 2°C graduation
Set point accuracy ±2°C ±2°C ±2°C
Stability @ 40°C ±0.05°C ±0.05°C ±0.1°C
Stability @ 100°C ±0.1°C ±0.1°C ±0.15°C
Max variation between blocks 0.2°C at 40°C 0.2°C at 40°C 0.2°C at 40°C
Heat up 30-37°C 8 minutes 8 minutes 8 minutes
Heat up 30-56°C 12 minutes 18 minutes 30 minutes
Dimensions (WDH) 202 x 260 x 105mm 279 x 260 x 105mm 279 x 260 x 105mm
Electrical supply 230V or 115V 50-60Hz 230V or 115V 50-60Hz 230V or 115V 50-60Hz
Power 300W 450W 450W
Shipping weight 4kg 6kg 6kg
Warranty 3 years 3 years 3 years