產品介紹∣ProboStat™ 全面集成系統
Search

ProboStat™ 全面集成系統
Extensive System

【Norecs】高溫電氣測量系統和週邊設備 ProboStat™ 系統

ProboStat™ 全面集成系統

簡介

ProboStat Extensive System

全面集成系統典型用途:
•直徑不同的圓盤樣品。
•可控氣氛和濃縮池。
•2、3和4電極設置。
•范德堡四點測量。
•條形樣本(4點和塞貝克係數測量)。
•電導率,阻抗譜,直流電流測量。
•傳輸數,滲透性等。

我要諮詢

ProboStat全面集成系統

全面集成系統典型用途:

  • 直徑不同的圓盤樣品。
  • 可控氣氛和濃縮池。
  • 2、3和4電極設置。
  • 范德堡四點測量。
  • 條形樣本(4點和塞貝克係數測量)。
  • 電導率,阻抗譜,直流電流測量。
  • 傳輸數,滲透性等。

整套系統包括隨附手冊、工具、簡易安裝台等,所有配件妥善安放於一個堅固的便於運輸和存儲的鋁製手提箱中。 
右圖顯示了已裝箱的整套系統的各個部件,第一層包括基座、支架、工具、電線(頂部),第二層是主要封閉管和樣品支撐管(底部),
第三層是電極接點、熱電偶、彈簧和輸氣管(gas tube)(中間)。
這樣的全套系統適用於以下類型實驗室:想要節約因反覆測試、調試和自主開發所花費的時間,直接獲得新技術的帶來的各種便利。

這一系統同樣適用於以下類型的博士或者博士後項目:預計在材料或材料類型的研究中需要運用多種技術。

ProboStat™附件概述以示意圖方式(下圖)說明瞭我們可以提供的電極接點和熱電偶的類型。 它們都包含在設備齊全的系統包中。

對這一組系統還可進行有選擇性的升級,比如,增購一台基座,使系統的測量量翻番,從而更高效地利用其他配件; 在支撐一些特定類型的SOFC作業中,用YSZ替換氧化鋁支架。

該系統包括(產品改進後可能有細微變化):
  • 包括所有連接和介面的基座 (options)。
  • 2個封閉管(氧化鋁和熔融石英)。
  • 3個氧化鋁樣品支撐管。
  • 2個氧化鋁彈簧元件。
  • 3個供氣管(氧化鋁和熔融石英)。
  • 4個熱電偶(Pt / Pt10%Rh)。
  • 15個單線和雙線Pt /氧化鋁電極接點。
  • 備品。
  • 8個金密封圈和8個銀密封圈。
  • 同軸電纜和熱電偶電纜,熱電偶插頭和氣體快速接頭。
  • 操作手冊。
  • 工具,簡易安裝台,鋁製運輸儲存箱等。

Extensive System

Typical use

  • Disk samples of varying diameters
  • Controlled atmospheres and concentration cells
  • 2, 3 and 4 electrode setups
  • van der Pauw 4-point measurements
  • Bar samples (4-point and Seebeck)
  • Conductivity, impedance spectroscopy, DC measurements
  • Transport number, permeability, etc.

The package comes with manuals, tools, simple mounting bench stand, etc. in a sturdy aluminium transport and storage case. The pictures show parts of a system as packed in the transport and storage case; layer with base unit, stand, tools, cables (top), layer with mainly enclosing tubes, and sample support tubes (bottom) and layer with electrode contacts, thermocouples, spring loads and gas tubes (middle).

Such a package would be suitable for laboratories which value the cost-effectiveness of direct acquirement of new techniques without trial and error and development time.

The example may also be a suitable system for a PhD or post-doc project where a large range of techniques are expected to be applied in the studies of a material or class of

materials.

Possible further upgrades comprise, for instance, an extra base unit to double the throughput of measurements by using the accessories more effectively, YSZ replacing alumina in supports for certain types of SOFC work, and spare parts.

System contains (subject to minor changes upon improvements in the product)

  • base unit with all connectionsand options
  • 2 enclosing tubes(alumina and fused quartz) 
  • 3 alumina samplesupport tubes
  • 2 alumina springload assemblies 
  • 3 gas supply tubes(alumina and fused quartz) 
  • 4 thermocouples(Pt/Pt10%Rh) 
  • 15 single and double wire Pt/alumina electrode contacts
  • spare parts
  • 8 Au seal rings and 8 Agsealing rings
  • Coax and thermocouple cables,thermocouple plugs, and gas quick-connects
  • Manual
  • Tools, simple mounting bench stand,aluminium transport and storage case and more.