產品介紹∣功率校正器和保護繼電器測試儀
Search

功率校正器和保護繼電器測試儀
Power calibrator and protection relay test set

【CALMET】電錶、鉤錶、LCR 錶、功率計校正 電力校正器 / 三相電力品質校正器

功率校正器和保護繼電器測試儀

簡介

CP11B

Single phase, class 0.02 and 0.05 power quality calibrator up to 120A and 560VAC with programmable power quality parameters. It makes possible to make automatic test of electricity meters, measurement transducers, current transformers and protection relays

我要諮詢
  • Voltage source up to 560V
  • Current source up to 120A with a single pair of current sockets
  • Accuracy class 0.02% or 0.05% to calibrate digital instruments
  • Single product in a single case without auxiliary amplifiers
  • High burden of outputs to drive older analogue instruments
  • Large color Touchscreen and Calpro 300 PCsoft
  • Manual mode and automatic test procedures

General parameters

Weight

14kg

Width x height (with feet) x depth (with feet and handle)

(448x181x431)mm

Power supply

90V…264V / 47...63Hz / 300VA

  • Voltage source up to 560V
  • Current source up to 120A with a single pair of current sockets
  • Accuracy class 0.02% or 0.05% to calibrate digital instruments
  • Single product in a single case without auxiliary amplifiers
  • High burden of outputs to drive older analogue instruments
  • Large color Touchscreen and Calpro 300 PCsoft
  • Manual mode and automatic test procedures

General parameters

Weight

14kg

Width x height (with feet) x depth (with feet and handle)

(448x181x431)mm

Power supply

90V…264V / 47...63Hz / 300VA