產品介紹∣三相全自動測試系統
Search

三相全自動測試系統
Three-phase Fully Automatic Test System with Reference Standard and Integrated C

【CALMET】電錶、鉤錶、LCR 錶、功率計校正 電力校正器 / 三相電力品質校正器

三相全自動測試系統

簡介

TS33

The Calmet TS33 portable test system consists of a three-phase reference meter of accuracy class 0.04% (or 0.1%) and an integrated three-phase current and voltage source up to 3x120A/600V

我要諮詢
  • Easy verification of meters under precise load conditions, using integrated current and voltage source
  • Automatic operation with predefined load points without the need of an external PC
  • Modern SD flash memory card up to 32GB for storage of customer data and measurement results
  • Display of vector diagram, phase sequence, wave form oscilloscope, harmonics spectrum bar and trend charts for analysis of the mains conditions
  • User-friendly system for data input and operation of combined source and reference meter
  • The system may be used either as a stand-alone reference standard meter class 0.04 or 0.1, or together with the integrated power source, or as a stand-alone three-phase power calibrator class 0.1
  • Data readout and test system control via USB, Ethernet and Bluetooth

Weight and dimensions (width x height x depth)

22kg and (550x345x200) mm

Power supply

85…265V / 47...63Hz / 400VA

Safety: Isolation protection and Measurement Category

IEC 61010-1 and 300V CAT III

Degree of protection

IP-30 (housing open) / IP-67 (housing closed)

Operation / storage temperature

-10…+50°C / -20…+60°C

Operation / storage relative humidity

<90% @ +0...+30°C and <75% @ +30...+50°C / <95% @ 0...+50°C

  • Easy verification of meters under precise load conditions, using integrated current and voltage source
  • Automatic operation with predefined load points without the need of an external PC
  • Modern SD flash memory card up to 32GB for storage of customer data and measurement results
  • Display of vector diagram, phase sequence, wave form oscilloscope, harmonics spectrum bar and trend charts for analysis of the mains conditions
  • User-friendly system for data input and operation of combined source and reference meter
  • The system may be used either as a stand-alone reference standard meter class 0.04 or 0.1, or together with the integrated power source, or as a stand-alone three-phase power calibrator class 0.1
  • Data readout and test system control via USB, Ethernet and Bluetooth

Weight and dimensions (width x height x depth)

22kg and (550x345x200) mm

Power supply

85…265V / 47...63Hz / 400VA

Safety: Isolation protection and Measurement Category

IEC 61010-1 and 300V CAT III

Degree of protection

IP-30 (housing open) / IP-67 (housing closed)

Operation / storage temperature

-10…+50°C / -20…+60°C

Operation / storage relative humidity

<90% @ +0...+30°C and <75% @ +30...+50°C / <95% @ 0...+50°C