簡介
MG20
- 輕量、便攜、強固，適用於校正製程中的待測裝置，極適合現場應用。
- 配備HM35系列精密數位壓力計。
- 可測量相對壓力、差壓、絕對壓力。
- 內建的壓力產生器能產生過壓達10 bar及欠壓（負壓）達-800 mbar。
- 測量範圍-800 mbar～17 bar。
- 可透過內建的可調容積，對壓力進行微調。
- 輕量、便攜、強固，適用於校正製程中的待測裝置，極適合現場應用。
- 配備HM35系列精密數位壓力計。
- 可測量相對壓力、差壓、絕對壓力。
- 內建的壓力產生器能產生過壓達10 bar及欠壓（負壓）達-800 mbar。
- 測量範圍-800 mbar～17 bar。
- 可透過內建的可調容積，對壓力進行微調。
- 提供防爆機型及適用於相容介質的機型。
- 測量功能包括壓力變化率、最小值/最大值、平均值。
- 操作簡單。
- 內建資料記錄功能。
- 紅外線介面。
- 使用電池電源操作。
- 可客製特殊的結構。
- 隨貨附上國際認可的SCS校正證明。
- 壓力模擬是透過手動泵浦及可調容積進行。
- 過壓範圍：0…10 bar。
- 欠壓範圍：0…-800 mbar。
- 測量範圍；解析度；最大負載容量；精度（v.E. ± 1位數）；*以下僅例舉，詳細請洽詢：
- 0... 25 mbar；0.001；125 mbar；0.2% / 0,1% / 0.05%。
- 0... 70 mbar；0.001；350 mbar；0.2% / 0.1% / 0.05%。
- 0... 200 mbar；0.01；1500 mbar；0.2% / 0.1%。
- 0... 300 mbar；0.01；1500 mbar；0.2% / 0.1% / 0.05%。
- 0... 500 mbar；0.01；4000 mbar；0.2% / 0.1%。
- 0... 1000 mbar；0.01；4000 mbar；0.2% / 0.1% / 0.05%。
- 測量介質：儀錶空氣、惰性氣體。
- 相容介質（相對壓力/絶對壓力）：所有與不銹鋼18/8（DIN 1.4305）相容的介質。
- 測量單位（依範圍而定）：mbar、bar、Pa、kPa、hPa、MPa、kg/cm2、kg/m2、mmHg、cmHg、mHg、inHg、mmH2O、cmH2O、mH2O、inH2O、ftH2O、psi、Ib/in2、lb/ft2、torr、atm。
- 溫度校正：0～50°C。
- 操作溫度：0～50°C。
- 通訊：串列紅外線通訊協定及SCPI命令。
- 顯示速率：2 M/秒。
- 電源：3x1.5V電池IEC LR6。
- 電池續航力：
- 非防爆機型：約90小時或電源供應裝置6VDC。
- 防爆機型：約60小時（無電源連接介面）。
- 儲存間隔：手動、10、25M/秒、1秒…24小時，可選擇。
- 氣動連接：Ø 4/ 6 mm軟管，NPT 1/8”（從10 bar起）。
- 機殼防護等級：IP 54。
- 詳細規格、配件、軟體及選購，歡迎洽詢。
- Portable and robust Pressure Calibrator for calibrating your test objects in the process...
- Thanks to the robust, compact and lightweight design, the MG20 Pressure Calibrator is perfectly suitable for on site applications.
- The MG20 Pressure Calibrator is suited with our HM35 series digital gauges.
- Relative pressure
- Differential pressure
- Absolute pressure
- The built in pressure generator is capable of producing overpressure up to 10 bar and under pressure up to -800 mbar.
- Measuring ranges from -800 mbar up to 17 bar
- Via built in volume, the pressure can be fine-adjusted.
- Ex versions
- Media compatible versions available
- Pressure change rate
- MIN/MAX values
- Averaging
- Easy Operation
- Integrated Datalogger
- Infrared Interface (IR)
- Average Value
- Battery operation
- Special Constructions available on request
- Our MG20 series Pressure Calibrators come including an internationally acknowledged SCS calibration certificate.
- Description:
- The mobile Pressure-Generator MG20 is equiped with our digital handheld pressure gauge HM35.
- It allows measurements of relative-, differential, or absolute-, pressure.
- The integrated pressure generator is capable of producing over-pressure up to 10 bar and under-pressure up to -800 mbar.
- Fine adjusting the pressure is done via integrated variable volume.
- Ex versions and media-compatible versions are also available.
- Functions such as pressure change rate, MIN/MAX and average value are available.
- At delivery, the MG20 comes including an SCS-certificate.
- Pressure simulation is done via hand pump and variable volume
- Over-pressure range: 0…10 bar
- Under-pressure range: 0…-800 mbar
- Measuring range; Resolution; Max. Load capacity; Accurac (v.E. ± 1 digit):
- 0... 25 mbar; 0,001; 125 mbar; 0,2% / 0,1% / 0.05%
- 0... 70 mbar; 0,001; 350 mbar; 0,2% / 0,1% / 0,05%
- 0... 200 mbar; 0,01; 1500 mbar; 0,2% / 0,1%
- 0... 300 mbar; 0,01; 1500 mbar; 0,2% / 0,1% / 0,05%
- 0... 500 mbar; 0,01; 4000 mbar; 0,2% / 0,1%
- 0... 1000 mbar; 0,01; 4000 mbar; 0,2% / 0,1% / 0,05%
- Measuring media: inert gases and instrument air
- Media compatible rel./abs. all media which are compatible with stainless steel 18/8 (DIN 1.4305)
- Measurement units (depending on range): mbar, bar, Pa, kPa, hPa, MPa, kg/cm2, kg/m2, mmHg, cmHg, mHg, inHg, mmH2O, cmH2O, mH2O,inH2O, ftH2O, psi, Ib/in2, lb/ft2, torr, atm
- Temperature calibration: 0°C... 50°C
- Operating temperature: 0°C... 50°C
- Communication: serial Infrared (IR) Protocol and SCPI-commands
- Display rate: 2 M/s
- Power supply:3 x 1.5 V battery IEC LR6
- Battery life time:
- approx. 90 h or power supply unit 6 VDC
- approx. 60 h EX-Version (no power supply connection available)
- Memory interval: manual, 10, 25 M/s, 1s... 24h selectable
- Pneumatic connection: hose Ø 4/6 mm NPT 1/8” (from 10 bar)
- Case, type of protection:IP 54
- Please feel free to contact for detailed specifications, accessories, software and options.