產品介紹∣高壓應用壓力自動校正器
Search

高壓應用壓力自動校正器
HUBER Automatic Pressure Calibrator For High-Pressure Applications

【HUBER】壓力計、壓力校正器 參考級壓力校正器系列

高壓應用壓力自動校正器

簡介

DPC3000

  • 具電氣信號處理功能的精密壓力控制器。
  • 配備7吋觸控顯示幕及輸入鍵盤。
  • 壓力測量範圍:從真空到250 bar。
  • 精度等級可達0.01% f.s.。
  • 使用液體。
  • 壓力傳感器(傳送器)自動校正及記錄器功能。

我要諮詢
  • 具電氣信號處理功能的精密壓力控制器。
  • 配備7吋觸控顯示幕及輸入鍵盤。
  • 壓力測量範圍:從真空到250 bar。
  • 精度等級可達0.01% f.s.。
  • 使用液體。
  • 壓力傳感器(傳送器)自動校正及記錄器功能。
  • 壓力計、洩漏及壓力開關測試。
  • 客製的測量程序。
  • 可選購污染防護。
  • 壓力範圍:從真空到250 bar。
  • 電氣數值校正模組 - EL-Cal(選購):
    • 來源電壓:0~26V,最大25mA。
    • 測量電壓:0~27V,Ri>1MΩ。
    • 測量電流:0~25mA,負載R=100Ω。
    • 精度:0.02% f.s.。
  • 壓力測量介質:氣體、低黏度液體。
  • 介面:RS232、USB、LAN。
  • 電子連接端:橡膠連接器。
  • 電源電壓:100~240VAC,50/60Hz。
  • 壓力連接:帶有可更換的5μ纖細濾網的1/8吋管螺紋,8腳連接器帶(用於選購的外部控制功能)。
  • 特殊功能:客戶特殊需求。
  • 詳細規格、配件、軟體及選購,歡迎洽詢。
  • Precision pressure controller with electrical signal processing
  • 7" touch display with additional input keypad
  • Pressure measurement range from vacuum up to 250 bar
  • Accuracy class up to 0.01% FS
  • Use of liquids
  • Transmitter calibration and logger function
  • Manometer, leak and pressure-switch test
  • Customised measuring routines
  • Contamination protection (optional)
  • Pressure range: From vacuum up to 250 bar
  • Calibration module for electrical values:
    • EL-Cal (optional):  
      • Source U: 0...26 V, max. 25 mA
      • Measurement U: 0…27 V, Ri > 1 MOhm
      • Measurement I: 0…25 mA, Rload = 100 Ohm
      • Accuracy: 0.02% FS
  • Pressure media: Gases, low viscosity liquids
  • Interfaces: RS232, USB, LAN
  • Electronic connection: Rubber connector
  • Supply Voltage: 100... 240 VAC, 50/60 Hz
  • Pressure connection: G 1/8” I with exchangeable fine mesh filter 5µ, 8-pin connector strip for ext. control functions (optional)
  • Special functions: customer-specific
  • Please feel free to contact for detailed specifications, accessories, software and options.