產品介紹∣防爆|非防爆型精密數位壓力計
Search

防爆|非防爆型精密數位壓力計
HUBER Digital Handheld Pressure Gauge

【HUBER】壓力計、壓力校正器 參考級手持式數位壓力計系列

防爆|非防爆型精密數位壓力計

簡介

HM35 EX|HM35

  • 適合多樣化的應用,壓力測量可以在過壓或真空範圍內執行,可測量絶對壓力、錶壓及差壓。
  • 壓力範圍從真空到250bar。
  • 對稱的測量範圍。
  • 可選擇的精度等級0.2%、0.1%、0.05% f.s.。
  • 提供適用於相容介質的機型。
  • 防爆機型符合在T3(可充電電池)及T4(傳統電池)操作的溫度範圍。
  • 使用電池電源或*主要電源操作(*非防爆機型)。
  • 壓力變化速率、最小值/最大值及平均值測量功能。

我要諮詢
  • 適合多樣化的應用,可在錶壓、差壓或絶對壓力區域內進行測量。
  • 壓力測量可以在過壓或真空範圍內執行。
  • 壓力範圍從真空到250bar。
  • 對稱的測量範圍。
  • 可選擇的精度等級0.2%、0.1%、0.05% f.s.。
  • 提供適用於相容介質的機型。
  • 防爆機型符合在T3(可充電電池)及T4(傳統電池)操作的溫度範圍。
  • 使用電池電源或*主要電源操作(*非防爆機型)。
  • 壓力變化速率、最小值/最大值與平均值測量功能。
  • 發光的顯示幕。
  • 資料記錄功能(內建記憶體),最多可儲存10,000個測量值(可選擇儲存間隔)。
  • 可透過紅外線介面,將所有的壓力測量資料,直接轉移到個人電腦。
  • 提供Windows相容通訊校正軟體。
  • 22個可選擇的測量單位。
  • 可選購特殊模式。
  • 隨貨附上國際認可的SCS校正證明。
  • 壓力測量感測器特點:
    • 溫度補償。
    • 長期穩定。
  • 備有各種配件,可供選擇:
    • 用於產生壓力的手動泵浦。
    • 壁上安裝。
    • 皮套。
    • 各種連接器,例如M10x1、NPT 1/8”、4 / 6mm軟管…。
    • 完整的操作套組。
  • 系統簡介:
    • 最令人印象深刻的特點是其多樣化的應用範圍。
    • 可在相對壓力、差壓或絶對壓力區域內進行測量。
    • 防爆機型符合在危險區域內應用的所有要求(Ex ia IIC T4)。
    • 提供例如壓力變化速率、最小值/最大值及平均值測量功能;HM35/HM35 EX也可個別設定為不同的應用。
    • 配備大型、讀值清楚的圖形顯示幕、方便手拿的尺寸、包含日期的實時時鐘、背景照明、10,000個測量值的資料儲存...等,使用相當方便。
  • 測量範圍;解析度;最大負載容量;誤差限值 F.S. ±1位數(*以下僅例舉,詳細請洽詢):
    • 0... 25 mbar;0.001;125 mbar;0.2%/0.1%/0.05%。
    • 0... 70 mbar;0.001;350 mbar;0.2%/0.1%/0.05%。
    • 0... 200 mbar;0.01;1500 mbar;0.2%/0.1%。
    • 0... 300 mbar;0.01;1500 mbar;0.2%/0.1%/0.05%。
    • 0... 500 mbar;0.01;4000 mbar;0.2%/0.1%。
    • 0... 1000 mbar;0.01;4000 mbar;0.2%/0.1%/0.05%。
  • 測量介質:儀錶空氣、惰性氣體。
  • 相容介質(相對壓力/絶對壓力):所有與不銹鋼18/8(DIN 1.4305)相容的介質。
  • 測量單位(依範圍而定):mbar、bar、Pa、kPa、hPa、MPa、kg/cm2、kg/m2、mmHg、cmHg、mHg、inHg、mmH2O、cmH2O、mH2O、inH2O、ftH2O、psi、Ib/in2、lb/ft2、torr、atm。
  • 溫度校正:0~50°C。
  • 操作溫度:0~50°C。
  • 通訊:串列紅外線通訊協定及SCPI命令。
  • 顯示速率:2M/秒。
  • 電源:3x1.5V電池IEC LR6。
  • 電池續航力:
    • 非防爆機型:約90小時或電源供應裝置6VDC。
    • 防爆機型:約60小時(無電源連接介面)。
  • 儲存間隔:手動、10、25M/秒、1秒…24小時,可選擇。
  • 氣動連接:Ø 4/6mm軟管,NPT 1/8”(從10 bar起)。
  • 機殼防護等級:IP 54。
  • 詳細規格、配件、軟體及選購,歡迎洽詢。
  • Pressure Measurement Device for measuring overpressure and vacuum...
  • Absolute- Gauge-, Differential- Pressure
  • The most impressive feature of the HM35 and HM35 EX manometer is the versatile range of applications.
  • It allows measurements in the area of gauge-, differential- or absolute pressure.
  • The pressure measurements can be executed in either ovepressure or vacuum ranges.
  • Pressure ranges from vacuum up to 250 bar available
  • Symmetrical measuring ranges available
  • Accuracy classes in 0.2% / 0.1% / 0.05% F.S. selectable
  • Media-compatible devices available
  • Ex versions available: The EX-version meet the requirements for opearting in T3 (rechargeable batteries) and T4 (conventional batteries) temperature ranges.
  • Pressure change rate
  • MIN/MAX and average value
  • Illuminated display
  • Datalogger for up to 10000 measured values (interval is selectable)
  • Via the infrared interface (IR), all data of the pressure measurements, can be transferred directly to a PC.
  • Calibration software for Windows available
  • 22 selectable measurement units
  • Mains operation (non EX version)
  • Battery operation
  • Average function
  • Special models on request
  • Our HM35 series Handheld Pressure Gauges, come with an internationally acknowledged SCS calibration certificate on delivery!
  • Our pressure measurement sensors for the HM35 series are
    • Temperature compensated
    • Long term stable
  • Various accessories available for the HM35 Handheld Pressure Gauges >
    • Hand operated pumps for pressure generation
    • Wall mounts
    • Leather cases
    • Various connectors, like M10x1, NPT 1/8", 4/6MM...
    • Complete service cases
  • Description
    • The most impressive feature of the HM35 and HM35 EX manometer is the versatile range of applications.
    • It allows measurements in the area of relative, differential or absolute pressure.
    • The EX-version meets all requirements for applications in hazardous areas (Ex ia IIC T4).
    • Functions such as pressure change rate, MIN/MAX and average value are available, in addition the HM35 / HM35 EX can also be individually configured for different applications.
    • A large, well readable graphics display, its handy size, a real time clock including date, the background illumination, the data memory for 10’000 measurements… only to mention a few highlights – facilitate its use. 
  • Measuring ranges; Resolution; Max. loading capacity; Error limit F.S. ± 1 digit:
    • 0... 25 mbar; 0,001; 125 mbar; 0,2% / 0,1% / 0,05%
    • 0... 70 mbar; 0,001; 350 mbar; 0,2% / 0,1%/ 0,05%
    • 0... 200 mbar; 0,01; 1500 mbar; 0,2% / 0,1%
    • 0... 300 mbar; 0,01; 1500 mbar; 0,2% / 0,1% / 0,05%
    • 0... 500 mbar; 0,01; 4000 mbar; 0,2% / 0,1%;
    • 0... 1000 mbar; 0,01; 4000 mbar; 0,2% / 0,1%/0,05%
  • Measuring media: inert gases and instrument air
  • Media compatible rel./abs.: all media which are compatible with stainless steel 18/8 (DIN 1.4305)
  • Units of measurement (depending on range): mbar, bar, Pa, kPa, hPa, MPa, kg/cm2, kg/m2, mmHg, cmHg, mHg, inHg, mmH2O, cmH2O, mH2O, inH2O, ftH2O, psi, Ib/in2, lb/ft2, torr, atm
  • Temperature calibration: 0 °C... 50 °C
  • Operating temperature: 0 °C... 50 °C
  • Communication: serial Infrared (IR) Protocol and SCPI-commands
  • Display rate: 2 M/s
  • Power supply: 3 x 1.5 V battery IEC LR6
  • Battery life time:
    • approx. 90 h or power supply unit 6 VDC
    • approx. 60 h EX-Version (no power supply connection available)
  • Memory interval: manual, 10, 25 M/s, 1s... 24h selectable
  • Pneumatic connection: hose Ø 4/6 mm NPT 1/8” (from 10 bar)
  • Case, type of protection: IP 54
  • Please feel free to contact for detailed specifications, accessories, software and options.