產品介紹∣自動真空除氣的油中溶解氣體分析儀|氣相層析儀
Search

自動真空除氣的油中溶解氣體分析儀|氣相層析儀
ENERGY SUPPORT Dissolved Gas Analysis with Automatic Degassing Unit (IEC 567/ASTM 3612)

【ENERGY SUPPORT】絕緣油分析產品系列 絶緣油分析系列

自動真空除氣的油中溶解氣體分析儀|氣相層析儀

簡介

TOP TOGA-GC

  • 符合IEC 567 / ASTM 3612標準、具自動真空除氣裝置的油中溶解氣體分析儀。
  • 一鍵式操作。
  • 全自動程序。
  • 多周期式真空除氣。
  • 提供完整的變壓器油氣體分析(11種氣體)及精準測量總氣體含量。

我要諮詢
  • 符合IEC 567 / ASTM 3612標準、具自動真空除氣裝置的油中溶解氣體分析儀。
  • 一鍵式操作。
  • 全自動程序。
  • 多周期式真空除氣。
  • 提供完整的變壓器油氣體分析(11種氣體)及精準測量總氣體含量。
  • 全自動轉移氣體樣本到氣相層析分析裝置。
  • 使用可追溯校正氣體輕鬆校正整個系統。
  • 適於驗收、維護及常規測試的最靈敏偵測(0.1ppm)。
  • 適用於工廠變壓器溫升試驗。
  • 為適用於實驗室及車間的理想解決方案。
  • 自動取樣器適用於16~32個樣本,無須人員看守操作。
  • 配備Expert System軟體,可依IEC 60599標準、Roger比值分析法、Duval三角診斷法等進行評估,並提供快速簡明的結論。
  • 真空除氣:無油、無汞。
  • 真空感測器:0.1~200mbar。
  • 樣品量:30~100ml。
  • 氣相層析裝置:
    • 熱導檢測器(TCD)。
    • 火焰離子化檢測器(FID)。
    • 甲烷化裝置。
    • 2個微型填充柱。
  • 自動取樣器:
    • 可更換為適於100ml、50ml或30ml玻璃注射器的樣品盤。
    • 適用於16或32個樣本。
    • 適用於所有類型、新的及用過的變壓器油。
    • 程序全自動、無污染的油樣注入、整合的沖洗步驟(可避免樣品殘留移轉)、可靠度測試。
  • 詳細規格、配件、軟體及選購,歡迎洽詢。
  • Dissolved Gas Analysis with automatic degassing unit According to IEC 567/ASTM 3612
  • One-touch operation
  • Fully automatic procedure
  • Multi-periodic vacuum degassing
  • Full TOGA analysis (11 gases) and Total Gas Content
  • Automatic transfer of gas sample
  • Easy calibration of the whole system with traceable calibration gas
  • Accurate measurement of total gas content
  • Most sensitive detection for Acceptance- Service- and Routine tests (0,1ppm)
  • Adaptable for Factory Transformer Heat-Run tests
  • Ideal solution for laboratories and workshops
  • Auto-sampler available for 16 – 32 samples for unattended operation
  • Expert System for quick and easy conclusions Evaluation according to: IEC 60599, Roger ratios, Duval etc.
  • Vacuum degassing: Oil- and Mercury-free
  • Vacuum sensor: 0,1 – 200 mbar
  • Sample volume: 30 – 100 ml
  • Gas Chromatograph:
    • Thermal Conductivity Detector (TCD)
    • Flame Ionisation Detector (FID)
    • Methanizer
    • 2 Micro packed columns
  • Auto-sampler:
    • Sample tray interchangeable for 100ml, 50 ml or 30 ml glass syringes
    • Available for 16 or 32 samples
    • For all types of transformer oils (new and used)
    • Procedure fully-automatic, contamination-free injection of oil samples, integrated rinsing steps to avoid carry-overs, plausibility tests.
  • Please feel free to contact for detailed specifications, accessories, software and options.