• 輸入電源 110V 或 230 VAC ; 2260W。
• 輸出功率 0-5V DC 0-20A，通道。
• 液體流速 0-120mL/min。
• 液體壓力 0-7psi。
• CO2 流速 0-500mL/min。
• CO2 壓力 0-10psi。
• CO2 供應連接 1/4 in壓縮接頭。
• 工作溫度 25C-60℃
• 通風流量 65cfm。
• 通風直徑尺寸 8 in。
• 陽極和陰極排氣輸出埠 3/8 in快速接頭。
• 外部尺寸( LxWxH ) 24 in X 32 in X 80 in。
• 重量 300 Ib。

Options

• Base model: All the components needed to run the electrolyzers.
• Upgrade 1:  This upgrades the sensors industrial grade explosion proof sensors from Honeywell and elsewhere,
• Upgrade 2:  Certification by NEMKO that the device follows UL/EU 61010-1.   We build our devices toward EU 61010-1.   Nemko can certify that it meets the standard.
• Upgrade 3:   Both updrade 1 and upgrade 2.

Key Features:

• Complete system: The test station has everything you need to test a small CO2 electrolyzer including an anolyte reservoir, pump, flow control, and heat exchanger, a temperature control system, and a programable power supply with an active computer interface.
• Versatile: Electrolyzers with active areas between 5 and 100 cm2 can be tested in the system.
• Unattended Operation: The test station enables researchers and developers to perform extended, long-term testing of CO2 electrolyzers without manual intervention.
• Programmable Power Supply: A programable power supply provides power to the electrolyzer cell, with control of the cell voltage or current as required for specific tests.
• Comprehensive Safety System: The station incorporates a robust safety system that automatically shuts down power to the electrolyzer in case of critical events, including:
• A CO or hydrogen leak
•  Blockage in the CO2 flow channel
• Anolyte leak
• Over-temperature condition
• Pump failure

​