簡介
A3900
簡單的振動監控
連續的機器或軸承監測
設置警報限制並用以交通信號燈顏色作為觀察
A3900是一個簡單的單通道線上監測系統。測量值顯示在前面板上，並可通過4-20mA電流迴路輸出傳輸到控制系統。綠色、黃色和紅色的LED燈告訴您機器/軸承的振動狀態。A3900單元包括一個可編程的輸出 "警報 "電驛。
簡單的振動監控
連續的機器或軸承監測
設置警報限制並用以交通信號燈顏色作為觀察
A3900是一個簡單的單通道線上監測系統。測量值顯示在前面板上，並可通過4-20mA電流迴路輸出傳輸到控制系統。綠色、黃色和紅色的LED燈告訴您機器/軸承的振動狀態。A3900單元包括一個可編程的輸出 "警報 "電驛。
訪問Adash官網，查看更多可靠性設備。
| Input channels: | ICP® for acceleration sensor. Input is able to process signal with maximum voltage ±5 V |
| Output: | 4 - 20 mA current loop (selectable active/passive) with setting of range of measured unit |
| Measuring Ranges: | 0 - 99.9 g, 0 - 999 mm/s (by sensor sensitivity, input signal: max. ±5 V) |
| Frequency Bands: | [ g ] 0,8 Hz – 16 kHz [ g ] 5 kHz – 16 kHz [ mm/s ], [ ips ] 10 Hz – 1 kHz Frequency ranges could be changed under request. |
| Sensor: | Accelerometer, ICP® powered |
| LEDs: | Vibration state indication according to defined vibration limits Power indication ICP® error indication |
| Powering: | 20 - 28 V DC (70mA/24V DC), external current loop supply (10-30V DC) |
| Dimensions: | 90 x 53 x 58 mm |
| Weight: | 130 g |
| Protection: | IP 20 |
Simple vibration monitoring
continuous machine or bearing monitoring
Set up alarm limits and observe traffic light colors
The A3900 is a simple one channel online monitoring system. Measured value is displayed on the front panel and can be transferred to the control system through 4-20 mA current loop output. Green, yellow and red LEDs informs you about the machine/bearing vibration state. The A3900 unit includes one programmable output “ALARM” relay.
Please see more at www.adash.com and come back to us for further assistance with your purchase.
| Input channels: | ICP® for acceleration sensor. Input is able to process signal with maximum voltage ±5 V |
| Output: | 4 - 20 mA current loop (selectable active/passive) with setting of range of measured unit |
| Measuring Ranges: | 0 - 99.9 g, 0 - 999 mm/s (by sensor sensitivity, input signal: max. ±5 V) |
| Frequency Bands: | [ g ] 0,8 Hz – 16 kHz [ g ] 5 kHz – 16 kHz [ mm/s ], [ ips ] 10 Hz – 1 kHz Frequency ranges could be changed under request. |
| Sensor: | Accelerometer, ICP® powered |
| LEDs: | Vibration state indication according to defined vibration limits Power indication ICP® error indication |
| Powering: | 20 - 28 V DC (70mA/24V DC), external current loop supply (10-30V DC) |
| Dimensions: | 90 x 53 x 58 mm |
| Weight: | 130 g |
| Protection: | IP 20 |