Extends service life of transformer by extending the service life of the insulating system (paper & oil).
Transformer remains in service during processing (no lost revenue due to down time).
Reduced processing costs in relation to other processes.
Maintains low moisture levels in transformers in service.
Transformers and its paper insulation have a primary enemy – Water. Water can be removed from a transformer using a vacuum dehydration process. Now, however an easier and less expensive method can be used to remove the water from the transformer oil and its paper insulation. Transformers that have 5% moisture or higher can be dried to acceptable levels without taking the transformer out of service.
Removes moisture from transformer oil and insulation.
Maintains low moisture levels in transformer oils in service.
Able to dry transformers not braced for vacuum.
Safety system – isolates itself in case of alarm or power failure.
No paper filters utilized.
Extends service life of transformer by extending the service life of the insulating system (paper and oil)
Transformer remains in service during processing (no lost revenue due to down time)
Reduced cost relative to other processes
Does not remove dissolved gas from transformer oil, allowing dissolved gas analysis (DGA) to give advanced notice of other potential problems in the system.
Transformer Oil Level Monitoring System (TOLMS)
Hygrometer – Doble Domino sensor for measurement of moisture level in the oil (PPM)
Touch screen interface with data logger with “PPM Trend” tool for monitoring moisture content over time.
E-mail /SMS alarm messages
Remote Monitoring of PPM Trend chart
Height: 60” (1,524 mm)
Width: 36” (1,140 mm)
Depth: 26” (1,470mm)
Weight: 750lbs (340kgs)
STANDARD VOLTAGE: 220V-1PH -50/60Hz (other voltages available on request)
Water content: < 10PPM
Removal of Particles: > 1 micron
Please feel free to contact for detailed specifications, accessories and options.