
|
一般 |
|
|
功能 |
超音波測量模塊 |
|
操作 |
前置超聲機載和接觸式超聲波傳感器(由SDT International提供) |
|
處理器 |
ARM Cortex-M4 @ 120MHz |
|
量測通道 |
2個並行隔離通道 |
|
量測範圍 |
-10.0 to 120.0 dBµV |
|
解析度 |
0.1 dB |
|
量測帶寬 |
[35 kHz, 38kHz] U [39 kHz, 42 kHz] heterodyned to [0.5 kHz, 3.5 kHz] |
|
信號放大 |
自動 |
|
環境 |
|
|
操作溫度 |
-20 to +55 °C (-4 to 131°F) |
|
基本 |
|
|
材質 |
聚碳酸酯纖維 |
|
尺寸 |
71.6x89.7x54.9 mm (2.80”x3.50”x2.13”) |
|
安裝 |
35 mm DIN-rail |
|
重量 |
180g (6.35o) |
|
電源 |
|
|
電源供應 |
24VDC +/- 10% (uses main power supply through internal DIN-rail connection, no external wiring is needed) |
|
功耗 |
≈100mA |
|
處理 |
|
|
訊號指示 |
信號RMS(具有可配置的RMS週期) |
|
取樣速率 |
64ksps |
|
解析度 |
12bits |
|
外部 |
兼容通過SMO或通過LEMO7和BNC輸出連接器使用外部設備進行動態測量和數據記錄 LEMO7 and BNC output connectors |
The US sensor module is the ultrasound conditioning and processing unit of the system. It collects analog ultrasound data (up to 2 sensors), computes all indicators and communicates this information to the main central unit.
The module is able to receive:
|
General |
|
|
Function |
Ultrasound measurement module |
|
Operable with |
Preamplified ultrasound airborne and contact sensors (provided by SDT International) |
|
Processor |
ARM Cortex-M4 @ 120MHz |
|
Measurement channel |
2 parallel isolated channels |
|
Measuring range |
-10.0 to 120.0 dBµV |
|
Resolution |
0.1 dB |
|
Measurement bandwidth |
[35 kHz, 38kHz] U [39 kHz, 42 kHz] heterodyned to [0.5 kHz, 3.5 kHz] |
|
Signal amplification |
Automatic |
|
Environmental |
|
|
Operating temperature range |
-20 to +55 °C | -4 to 131°F |
|
Mechanical |
|
|
Housing material |
Polycarbonate |
|
Dimensions housing |
71.6x89.7x54.9 mm | 2.80”x3.50”x2.13” |
|
Mounting |
35 mm DIN-rail |
|
Weight |
180g | 6.35oz |
|
Power |
|
|
Power supply |
24VDC +/- 10% (uses main power supply through internal DIN-rail connection, no external wiring is needed) |
|
Power consumption |
≈100mA |
|
Processing |
|
|
Signal indicators |
Signal RMS (with configurable RMS period) |
|
Sample rate |
64ksps |
|
Resolution |
12bits |
|
External |
Compatible for dynamic measurement and data recording using SDT or external devices through LEMO7 and BNC output connectors |