產品介紹∣Calport 100 Plus-電錶測試儀
Search

Calport 100 Plus-電錶測試儀
Calport 100 Plus - Electricity meters tester

【CALMET】電錶、鉤錶、LCR 錶、功率計校正 變比測試儀

Calport 100 Plus-電錶測試儀

簡介

Calport 100 Plus

Electricity meters tester class 0.1 or 0.2. Three phase tester of CT and PT transformers. It makes possible electricity meters testing on the site or in the laboratory. 

我要諮詢

Calport 100 Plus Analyser is the universal solution with configurable six measuring inputs: 3xU+3xI or 6xI or 6xU. The Calport 100 Plus Analyser is designed for testing of single and three phase energy meters, Current Transformers (CT) and Potential Transformers (PT) in LV and MV power networks. It contains additional functions:

  • verification of network wiring connection,
  • measurements of power network parameters,
  • multi-variant data tracing – digital and graphic display, internal memory, local printing, transmission by the interface and analysis on PC computer.
  • Measure of power network parameters (class 0.1 or 0.2)
  • Voltage range 0.05…480V and 0.5…40kV
  • Current range 0.001...10(100)(1000)(2000)(30/300/3000)A
  • Testing of energy meters
  • Testing of Current Transformer (CT) in LV and MV nets
  • Testing of Potential Transformers (PT) in MV nets
  • Powering from measurement network
  • Calibration Certificate

The Calport 100 Plus set is placed in plastic KAS100 transportation case for carrying in close state and for working in open state with analyser in hard conditions on the site. The Calport 100 Plus standard set consists of:

Calport 100 Plus analyser class 0.1 or 0.2,
• power cord,
• fuse T0.25A, 250V, 5x20 (2pcs),
• set of safety measurement cables (10pcs),
• adapter with flexible Cu wire (6pcs),
• safety test clip Kleps (3pcs),
• safety crocodile test clip,
• CF100 photo head for counting LED flashing of meters and with "start/stop" button,
• user’s manual,
• guarantee certificate,
• manufacturer's calibration certificate.


Optionally the Calport 100 Plus set may be equipped in:
• AKD100 additional accessories (handlers and terminals 42 pcs) of safety cables,
• CT10A electronic compensated clamps up to 10A (3pcs),
• CT100A electronic compensated clamps up to 100A (3pcs),
• CT1000A electronic compensated clamps up to 1000A (3pcs),
• FCT3000A electronic compensated flexible clamps in ranges 30/300/3000A (3pcs),
• AmpLiteWire 2000A primary current sensors up to 2000A for LV and MV nets (1pc),
• VoltLiteWire 40kV primary voltage sensors up to 40kV (1pc),
• CF101 photo head for counting rotation of inductive meters wheel disc,
• UCF100 holder for CF100 and CF101 photo heads,
• CF102 photo head with holder for inductive meters and meters with LED,
• KAS100 transportation case for portable work,
• DR100 miniature thermal printer,
• DR200 miniature thermal printer for quick printing with accumulator,
• S0 cable,
• Calsoft 100 PC software on CD with USB-RS232 cable.

Calport 100 Plus Analyser is the universal solution with configurable six measuring inputs: 3xU+3xI or 6xI or 6xU. The Calport 100 Plus Analyser is designed for testing of single and three phase energy meters, Current Transformers (CT) and Potential Transformers (PT) in LV and MV power networks. It contains additional functions:

  • verification of network wiring connection,
  • measurements of power network parameters,
  • multi-variant data tracing – digital and graphic display, internal memory, local printing, transmission by the interface and analysis on PC computer.
  • Measure of power network parameters (class 0.1 or 0.2)
  • Voltage range 0.05…480V and 0.5…40kV
  • Current range 0.001...10(100)(1000)(2000)(30/300/3000)A
  • Testing of energy meters
  • Testing of Current Transformer (CT) in LV and MV nets
  • Testing of Potential Transformers (PT) in MV nets
  • Powering from measurement network
  • Calibration Certificate

The Calport 100 Plus set is placed in plastic KAS100 transportation case for carrying in close state and for working in open state with analyser in hard conditions on the site. The Calport 100 Plus standard set consists of:

Calport 100 Plus analyser class 0.1 or 0.2,
• power cord,
• fuse T0.25A, 250V, 5x20 (2pcs),
• set of safety measurement cables (10pcs),
• adapter with flexible Cu wire (6pcs),
• safety test clip Kleps (3pcs),
• safety crocodile test clip,
• CF100 photo head for counting LED flashing of meters and with "start/stop" button,
• user’s manual,
• guarantee certificate,
• manufacturer's calibration certificate.


Optionally the Calport 100 Plus set may be equipped in:
• AKD100 additional accessories (handlers and terminals 42 pcs) of safety cables,
• CT10A electronic compensated clamps up to 10A (3pcs),
• CT100A electronic compensated clamps up to 100A (3pcs),
• CT1000A electronic compensated clamps up to 1000A (3pcs),
• FCT3000A electronic compensated flexible clamps in ranges 30/300/3000A (3pcs),
• AmpLiteWire 2000A primary current sensors up to 2000A for LV and MV nets (1pc),
• VoltLiteWire 40kV primary voltage sensors up to 40kV (1pc),
• CF101 photo head for counting rotation of inductive meters wheel disc,
• UCF100 holder for CF100 and CF101 photo heads,
• CF102 photo head with holder for inductive meters and meters with LED,
• KAS100 transportation case for portable work,
• DR100 miniature thermal printer,
• DR200 miniature thermal printer for quick printing with accumulator,
• S0 cable,
• Calsoft 100 PC software on CD with USB-RS232 cable.