簡介
- 將塗佈器轉變為縫模列印機
- 超過6 mm的可調節高度
- 與縫模頭、注射泵、管道加熱器和消耗品入門套件做搭配，或選擇定制來容納您所選擇的縫模頭
- 可選擇帶有可實現最高重現性的塗佈器和注射泵的電腦控制系統
- 將塗佈器轉變為縫模列印機
- 超過6 mm的可調節高度
- 與縫模頭、注射泵、管道加熱器和消耗品入門套件做搭配，或選擇定制來容納您所選擇的縫模頭
- 可選擇帶有可實現最高重現性的塗佈器和注射泵的電腦控制系統
| Art. No. | Description |
|---|---|
| CS100 | Control system for the whole slot die coating process with software and PC |
| SA80 | Slot die applicator for 80mm coating head |
| SC80 | Coating head 80mm |
| SH80 | Heating system for coating head 80mm incl. ink and pipe heater – 4 temperature controllers for individual heating |
| SA150 | Slot die applicator for 150mm coating head |
| SC150 | Coating head 150mm |
| SH150 | Heating system for coatig head 150mm incl. ink and pipe jeater – 4 temperature controllers for individual heating |
| SP10 | Syringe pump for up to 10ml syringes |
| SP20 | Syringe pump for up to 20ml syringes |
- Transform a film applicator into a slot-die printer
- Height adjustment over more than 6 mm
- As bundle with slot-die head, syringe pump, pipe heaters and consumables starter kit or customized to hold your choice of slot-die heads
- Optional computer-controlled system with film applicator and syringe pump for highest reproducability
| Art. No. | Description |
|---|---|
| CS100 | Control system for the whole slot die coating process with software and PC |
| SA80 | Slot die applicator for 80mm coating head |
| SC80 | Coating head 80mm |
| SH80 | Heating system for coating head 80mm incl. ink and pipe heater – 4 temperature controllers for individual heating |
| SA150 | Slot die applicator for 150mm coating head |
| SC150 | Coating head 150mm |
| SH150 | Heating system for coatig head 150mm incl. ink and pipe jeater – 4 temperature controllers for individual heating |
| SP10 | Syringe pump for up to 10ml syringes |
| SP20 | Syringe pump for up to 20ml syringes |