Inductive principle, robust design, temperature compensated... HUBER transducers......the HT02 series is perfectly suitable of measuring over-, under- and differential pressure of non aggressive gasses.
The rugged design allows the usage of the HT02 series even in harsh environments.
Our HT02 devices score with features like long term stability, linearity and reproduceability.
The used sensors are temperature compensated. A possible temperature drift is therefore reduced to a minimum.
The HT02 puts out a analog voltage- (0… 10 V) and a current-signal (0… 20 mA). The current signal can be switchend to 4… 20 mA.
For highly changing pressures, a corresponding damping can be cut in. The delay in the damping can be selected via dip switch (10ms / 2 sec. / 4 sec. )
Various individual configuration options can be selected and therefore ensure, the devices of the HT02 Series to fit perfectly in your application.
The pressure transducers of the HT02 type series are suitable for detection of excess pressure, low pressure or differential pressure of non-aggressive gasses.
These robust versions can be applied in laboratories and under industrial conditions.
Important criteria such as long-term stability, linearity and good reproducibility are guaranteed through their sturdy mechanical construction.
Temperature drift is minimised through targeted compensation of every sensor.
The wear-free inductive measurement system allows for almost maintenance-free operation.
The integrated electronic system provides a pressure-proportional voltage signal of 0 to 10 V in the output (option: current signal 0 (4) to 20 mA).
This allows for interference-free transmission of signals even over comparatively large distances.
For strongly varying pressures a dampening function is included.