產品介紹∣Flow switches for insertion installation / Plastic version with PVC sheathed cab
Search

Flow switches for insertion installation / Plastic version with PVC sheathed cab

【SIKA】可攜型乾式高溫校正爐、測試泵、各種流量感測器 流量和液位測量

Flow switches for insertion installation / Plastic version with PVC sheathed cab

簡介

Type VKL05

  • Insertion installation in pipeline DN 50…150
  • optional: Push-in mounting
  • sealed by built-in O-ring

我要諮詢

SIKA flow switches are used for monitoring volumetric flows. Depending on the individual requirements, they are available for different nominal diameters and setpoint ranges. Thanks to the modular design, product versions and options for various applications can be set up. The further temperature and pressure ranges as well as the selection of materials or diverse connection options offer a high level of flexibility. Therefore, SIKA flow switches are used in many different areas:

  • heating technology
  • industrial cooling circuits
  • water treatment
  • potable water applications

This flow switch is particularly suitable for pool applications.

The flow switch consists of a paddle system with a permanent magnet at the upper end. A reed contact is placed above this magnet outside the flow.

A second magnet is used to generate a restoring force for the paddle. When the flow to be monitored comes into contact with the paddle system, it is deflected. This causes the magnet to change its position relative to the reed contact, which is thus actuated. As soon as the flow is interrupted, the paddle moves back to its start position and actuates the reed contact again. The restoring force required for this is generated by the two repulsing magnets.

The utilization of the magnetic force, compared to a conventional leaf spring, results in significantly better long-term stability and much greater insensitivity to pressure peaks.

Technical data VKL05 / VKL05 Push-In
Switching function Contact closes at increasing flow
Nominal diameter range Applicable in DN 50...150
Pressure rating PN 10
Temperature ranges
Medium -20...70 °C
Ambient -20...70 °C
Electrical data
Electrical connection 1.5 m PVC jacket cable
Degree of protection EN 60529 IP65
Max. Switching current 1 A
Max. Rating 26 VA, 20 W
Max. Switching voltage 230 VAC, 48 VDC
Protection class EN 60730-1 Class II