產品介紹∣Flow switches for insertion installation / Metal version with plug connector
Search

Flow switches for insertion installation / Metal version with plug connector

【SIKA】可攜型乾式高溫校正爐、測試泵、各種流量感測器 流量和液位測量

Flow switches for insertion installation / Metal version with plug connector

簡介

Type VHS05

  • Standard flow switch
  • Insertion installation in pipelines DN 50…150
  • Threaded adapters for tees and pipe insertion installation
  • Alternatively soldering or welding adapters

我要諮詢

SIKA flow switches are used for monitoring volumetric flows. Depending on the individual requirements, they are available for different nominal diameters and setpoint ranges. Thanks to the modular design, product versions and options for various applications can be set up. The further temperature and pressure ranges as well as the selection of materials or diverse connection options offer a high level of flexibility. Therefore, SIKA flow switches are used in many different areas:

  • heating technology
  • industrial cooling circuits
  • water treatment
  • potable water applications

The flow switch consists of a paddle system with a permanent magnet at the upper end. A reed contact is placed above this magnet outside the flow.

A second magnet is used to generate a restoring force for the paddle. When the flow to be monitored comes into contact with the paddle system, it is deflected. This causes the magnet to change its position relative to the reed contact, which is thus actuated. As soon as the flow is interrupted, the paddle moves back to its start position and actuates the reed contact again. The restoring force required for this is generated by the two repulsing magnets.

The utilization of the magnetic force, compared to a conventional leaf spring, results in significantly better long-term stability and much greater insensitivity to pressure peaks.

Technical data
Switching function Contact
→closes at increasing flow
→opens at decreasing flow
Reversing possible
Pressure rating PN 25
Temperature ranges
Medium -25...110 °C
Ambient -25...80 °C
Electrical data

Electrical connection
→VHS

→VH3


Plug connector DIN EN
175301-803-A incl. cable socket
1.5 m PVC jacket cable
Max. switching current 1 A
Max. switching voltage 230 VAC, 48 VDC
Max. rating 26 VA, 20 W
Degree of protection EN 60529 IP65
Protection class EN 60730-1 Class II