產品介紹∣Bourdon tube pressure gauges without casing filling / Industry version
Search

Bourdon tube pressure gauges without casing filling / Industry version

【SIKA】可攜型乾式高溫校正爐、測試泵、各種流量感測器 壓力測量

Bourdon tube pressure gauges without casing filling / Industry version

簡介

Type MRE-MREG

  • Suitable for outdoor use - closed system
  • Casing completely stainless steel
  • Without electrical auxiliary energy

我要諮詢

SIKA quality pressure gauges in industrial version with 100, 160 or 250 mm stainless steel casing are suitable for pressure measurement of gaseous and liquid media, but not for highly viscous or crystallising media.

DIN display ranges available from -1...0 bar up to 0...1,600 bar (up to...1,000 bar, brass connection; up to...1,600 bar with stainless steel connection). We manufacture special ranges on request.

The stainless steel casing is available either as a bayonet ring case (type MRE) or as a cramped-on ring case (type MRE-G)

Technical data
Type MRE / MRE-g
Version Bayonet ring case or crimped-on ring case
Nominal size 63 mm
Accuracy EN 837-1, class 1.6 and class 2.5 (for display ranges 0...600 bar and 0...1000 bar)
Medium / Application Liquid and gaseous media
Process connection Thread see table , brass, optional stainless steel
Measurement system Bourdon spring bronze, optional stainless steel
Degree of protection according to EN 60529 IP54 (IP65 for filled cases with closed pressure compensation insert)
Ambient temperature -40 to 60 °C (-20 to 60 °C with case filling)
Storage temperature -40 to 70 °C (-20 to 70 °C with case filling)
Medium temperature Devices with brass connection max. 60 °C
Devices with stainless steel connection max. 200 °C (max. 100 °C with case filling)
Nominal use temperature 20 °C*
Pressure load capacity Of full-scale value
g Resting load
g Dynamic load
g Overload
75 %
65 %
Max.