產品介紹∣VM-560 Service Drop Locator
Search
VM-560 Service Drop Locator

簡介

VM-560

  • 堅固輕便
  • 視覺和聽覺反應
  • 被動和主動定位模式
  • 按鈕蓋深度讀數

我要諮詢

VM-560 是一種通用定位器,用於在各種情況下檢測埋地管道和電纜服務。 憑藉 50/60Hz 無源電源定位頻率和三個有源頻率,VM-560 定位器將滿足那些希望檢測有源電力電纜的存在和追踪短距離的人的要求。 VM-560 發射器還具有 8kHz 故障查找的附加頻率,因此當與 VM-510 獨立 A 框架故障定位器一起使用時,它可用於檢測電纜上是否存在接地到護套故障。
1 瓦發射器通過直接連接或感應應用定位頻率。 可選的感應夾可用於夾住線路並將定位信號感應到線路上。
VM-560 實用定位器頻率:50/60Hz、512/640Hz、8.19kHz、480kHz 和 8kHz FF

 

  VM-550/560 Specifications
Weight Receiver: 1.37lbs / 0.7kg
Transmitter: 1.57lbs. / 0.78kg
Dimensions Receiver: 34.6in(L) x 3.1in(W) x 2.8in(H),880mm x 80mm x 70mm
Transmitter: 18.1in x 3.5in x 2.6in,46cm x 9.0cm x 6.5c
Operating frequencies VM-550 Utility Locator:50/60Hz*, 512/640Hz*, 8.19kHz, 83.1kHz & 8kHz FF
VM-560 Utility Locator:50/60Hz*, 512/640Hz*, 8.19kHz, 480kHz & 8kHz FF
* North American versions use 60Hz power and 512Hz low frequency.
* All other versions use 50Hz power and 640Hz low frequency.
Display Dot Matrix
Receiver battery life 2 x AA Alkaline batteries - typically 20 hours continuous use at 70°F (21°C)
Transmitter battery life 4 x D Cell Alkaline batteries - typically 28-hours at full power and 150-hours on low power
Construction Receiver: High impact ABS plastic and carbon fiber antenna tube
Transmitter: High impact ABS

The VM-560 is a general-purpose locator used to detect buried pipe and cable services in a variety of situations. With a 50/60Hz passive power locating frequency and three active frequencies, the VM-560 locator will meet the requirements of those wishing to detect the presence of active power cables and to trace short ranges. The VM-560 transmitter also has the additional frequency of 8kHz Fault-find so it can be used to detect the presence of ground to sheath faults on cable when used with the VM-510 Stand Alone A-Frame fault locator.

The 1-Watt Transmitter applies a locate frequency by direct connection or induction. Optional Induction Clamps can be used to clamp around a line and induce the locate signal onto it.

VM-560 Utility Locator frequencies: 50/60Hz, 512/640Hz, 8.19kHz, 480kHz and 8kHz FF

  VM-550/560 Specifications
Weight Receiver: 1.37lbs / 0.7kg
Transmitter: 1.57lbs. / 0.78kg
Dimensions Receiver: 34.6in(L) x 3.1in(W) x 2.8in(H),880mm x 80mm x 70mm
Transmitter: 18.1in x 3.5in x 2.6in,46cm x 9.0cm x 6.5c
Operating frequencies VM-550 Utility Locator:50/60Hz*, 512/640Hz*, 8.19kHz, 83.1kHz & 8kHz FF
VM-560 Utility Locator:50/60Hz*, 512/640Hz*, 8.19kHz, 480kHz & 8kHz FF
* North American versions use 60Hz power and 512Hz low frequency.
* All other versions use 50Hz power and 640Hz low frequency.
Display Dot Matrix
Receiver battery life 2 x AA Alkaline batteries - typically 20 hours continuous use at 70°F (21°C)
Transmitter battery life 4 x D Cell Alkaline batteries - typically 28-hours at full power and 150-hours on low power
Construction Receiver: High impact ABS plastic and carbon fiber antenna tube
Transmitter: High impact ABS