產品介紹∣殷敬精密工業有限公司ING-JING PRECISE INDUSTRIAL CORP
Search

含能材料敏感性檢測系列

Explosives Sentivity Testing Instruments

【Ozm】火藥及危險易燃材料測試設備

微量靜電火花敏感度測試器

微量靜電火花敏感度測試器 / OZM Small-Scale Electrostatic Spark X SPARK 10

X SPARK 10

  • OZM X SPARK 10是最新一代的通用測試器(源自舊型ESD 2008A),設計專用於精準的測量含能材料能量的起爆 - 對靜電火花的敏感度。
  • X SPARK 10的設計,適用於在放電能量範圍25 μJ~25 J及電壓500V~10 KV下,精準測量含能材料的起爆能量。
  • X SPARK 10在2種放電模式下運作 - 振盪及阻尼 – 以測試各類含能材料對靜電火花(放電)的敏感度。
  • 可提供幾種火花間隙組件的設計,也可提供依據不同標準或測試方法的要求所進行的客製化設計。

MORE
靜電放電產生器(靜電放電敏感度測試器)

靜電放電產生器(靜電放電敏感度測試器) / OZM ESDEX-25 Electrostatic Discharge Generator

ESDEX-25

  • OZM ESDEX 25是用於測試電子爆炸裝置的靜電放電產生器,其設計是用於測定電子爆炸裝置例如雷管、引信、點火器、爆管、彈藥元素及其他類似元件對高壓靜電放電的敏感度。
  • ESDEX-25可進行單次或連續重複放電,並且內建可更換的電容器與電阻器組。
  • 特點包括:
    • 操作模式能夠產生一個人體的等效放電。
    • 遠端控制採用光纖通訊,能在操作中保持安全的測試距離。

MORE
靜電放電產生器(靜電放電敏感度測試器)

靜電放電產生器(靜電放電敏感度測試器) / LARGE SCALE ELECTROSTATIC DISCHARGE ESD LS30

LS30

The ESD LS30 (Instrument for Large Scale Electrostatic Discharge Sensitivity Test) is designed for the classification of large charges of energetic materials through a series of intensive electrostatic discharges with the energy of up to 15.6 J at 30 kV in accordance with military standards and requirements. The ESD LS30 is capable of testing various types and amounts of solid or granular sample forms weighing up to several kilograms. This workhorse is able to perform single or consecutive repeated discharges.

MORE
BAM衝擊試驗機或落錘試驗

BAM衝擊試驗機或落錘試驗 / BAM FALL HAMMER

BFH-12A

The BAM Fall Hammer (also known as BAM Impact Tester or Drop Hammer) is designed to determine the sensitivity of high explosives, propellants, pyrotechnics and primary explosives to the impact stimuli of a fallen drop weight in accordance with the BAM procedure.

The BFH-12A is equipped with an automated lifting mechanism for remote controlled positioning, dropping and collection of the drop weight. The BFH-12A boasts a unique Drop Weight Exchange Window for safer, quicker and more convenient exchanges of the drop weights.

MORE
自動爆炸溫度測試儀AET 402

自動爆炸溫度測試儀AET 402 / AUTOMATIC EXPLOSION TEMP TESTER

AET 402

The AET 402 (Automatic Explosion Temperature Tester) is used for the determination of the explosion (ignition) temperature of energetic materials during the effect of thermal load (heat).

MORE
最低燃燒壓力MBP

最低燃燒壓力MBP / MINIMUM BURNING PRESSURE

MBP

The MBP (Minimum Burning Pressure) is used for the determination of the minimum burning pressure of emulsion explosives ignited by a hot wire in a closed vessel under high pressure conditions. The pressure and temperature of the sample are recorded. The MBP is a completely new high-end approach; it was developed by OZM Research™ in collaboration with CERL (Canadian Explosives Research Laboratory).

MORE
1