氣體和粉塵的爆炸室 / CA 20L 20 L SPHERE + CA 1M3 1M3 CHAMBER

CA 20L,CA 1M3

Explosion chambers are used for the measurement of the basic explosion characteristic of flammable dusts, gases and vapors. The characteristics measured are the maximum explosion pressure, the maximum rate of pressure rise, the lower and upper explosibility limits and limiting oxygen concentrations.

粉塵分散最小點火能量的測量 / MEASUREMENT OF MINIMUM IGNITION ENERGY OF DUST DISPERSIONS

MIE

The Minimum Ignition Energy (MIE) of a combustible substance is the lowest value of the electrical energy stored in a capacitor which upon discharge is just sufficient to ignite a fuel/air mixture at atmospheric pressure and room temperature. The MIE of dust dispersions is one of the key parameters for an assessment of the hazard situation in plants with dust appearance establishing the extent and, hence, the cost of protective measures.

液體AIT 551的自燃溫度 / AUTOIGNITION TEMPERATURE OF LIQUID AIT 551

AIT 551

Autoignition temperature is the lowest temperature at atmospheric pressure at which a substance will burst into flame in the absence of an external source of ignition (spark or flame). The AIT (Auto-Ignition Temperature Tester) is used for the determination of the auto-ignition temperature of both liquid and solid chemicals through means of visual observation and sample temperature measurement.

固體RSIT的相對自燃溫度 / RELATIVE SELF-IGNITION TEMPERATURE FOR SOLIDS RSIT

RSIT

When a solid spontaneously ignites at elevated temperatures this phenomenon is called self-ignition. The RSIT (Relative Self-Ignition Temperature for Solids) device is used to measure a solids self-ignition temperature. The RSIT is preliminary used for screening tests for the lowest possible ambient temperature at which a substance will spontaneously combust.

持續的可燃性測試儀SCT100 / SUSTAINED COMBUSTIBILITY TESTER SCT100

SCT100

The measurement of ignition temperature is essential for industrial plants or technologies dealing with fuels, oils, and other combustible liquids. The SCT-100 (Sustained Combustibility Tester) determines the ability of a substance to sustain combustion after ignition by flame.

DUST LAYER點火溫度測試儀LIT400 / DUST LAYER IGNITION TEMPERATURE TESTER LIT400

LIT400

The LIT 400 (Dust Layer Ignition Temperature Tester) is intended for the determination of the minimum temperature of a hot surface leading to the degradation or ignition of dust layers of a defined thickness.

最低點火溫度測試儀MIT1000 / MINIMUM IGNITION TEMPERATURE TESTER MIT1000

MIT1000

The MIT 1000 (Minimum Ignition Temperature Tester) is used for the determination of the minimum temperature of a hot surface which leads to the degradation or the ignition of suspended dust particles.

用於可燃性FRTA-I的濃度限值的儀器 / INSTRUMENT FOR CONCENTRATION LIMITS OF FLAMMABILITY FRTA-I

FRTA-I

The FRTA-I (Instrument for Concentration Limits of Flammability Determination) is designed to determine both the Lower Flammability Limit (LFL) and the Upper Flammability Limit (UFL) of various flammable gases or volatile liquids.

The FRTA-I operates on high voltage electrical ignition and visual observations of flame propagation. It disperses flammable liquids in air at atmospheric pressures via vapor pressure.

自加熱物質TESTER SHT 150 / SELF HEATING SUBSTANCES TESTER SHT 150

SHT 150

The SHT 150 (Self Heating Substances Tester) is a vital instrument used for the determination of a substance’s selfheating due to self oxidative heating and then decompose. The SHT 150 operates on the determination of the exothermal decomposition of sample being directly exposed to hot air at elevated temperatures.

GASMIX APPARATUS / GASMIX APPARATUS

The GASmix apparatus is an universal tool for both laboratory and industrial purposes. The GASmix prepares gas mixtures of precise concentrations for the purpose of testing. It is an essential instrument for technologies or tests which require diluting or mixing different gas mixtures with a specific desired flow, pressure and temperature.