簡介
NHT 3DL
。可搭配各式探棒,而在寬廣的頻率範圍,進行選頻或寬頻模式測量。
。時域/頻域測量:選頻模式:0Hz~1MHz / 寬頻模式:100kHz~40GHz。
。選頻模式:時域分析(自動與手動觸發的示波器模式)。
。實時的頻域分析及快速傅利葉轉換(FFT)頻譜分析。
。NHT 3DL 專門設計用於在時域和頻域提供電磁場測量。
。兩種模式下的頻寬均為 1 MHz。
。可以分析和儲存具有暫態/脈衝特徵的複雜波形。
。在FFT分析模式下,1 MHz頻段,有4個十進位的頻帶 1/10/100 /1 000 kH z,每十進位的解析度為 1 000點,並具有自動峰值搜索標記。
。在示波器模式下,具有手動觸發功能和振幅/時間標記的高清時間幀。
。搭配100 kHz至40 GHz 射頻探棒的寬頻作模式下,可將脈衝信號基本頻帶解調至500 ns。
。此模式專為雷達源識別和測量而設計。
。NHT 3DL可透過光纖或無線(Wi-Fi)連接完全遠端控制。
產品簡介:
。NHT 3DL 是具有最先進技術的新型電磁波分析儀。
。功能強大、輕巧、緊湊、完全無磁性,超過24小時的操作電量和幾乎無限的儲存容量。
。具有高解析度彩色觸控顯示幕使用介面,可通過 Wi-Fi進行遠端控制,並顯示在Windows系統(PC/平板電腦),及安卓裝置(智慧手機)上。
。符合2013/35 / EU指令,可實時執行加權峰值測量(WP10)。
。配備複雜信號分析部分,由FFT分析儀,和配有觸發和標記的完整示波器功能。
。在寬頻模式下,NHT 3DL可以解調和重建,Tau值高達500 ns的脈衝雷達信號。
一般規格
。電池: 鋰充電式電池
。操作時間: > 24 小時 (無背光及外部附件)
。充電時間: 3 小時
。電池電量指示: %指示
。內建感測器: 濕度(精度 ±2%) 及溫度(精度 ±0.2°C)
。工作溫度: -10 °C~ +50 °C
。存放溫度: -20 °C ~ +70°C
。濕度: 5至95%,無凝露
。體積 (H x W x D): 170x85x31mm (不含探棒)
。重量: 650g (包含電池,不含探棒)
。製造國家: 義大利
頻率範圍
選頻模式: DC – 1 MHz
寬頻模式: 100 kHz – 40 GHz
操作介面
。圖形化顯示幕: 4.3” TFT, 272 x 480 像素, 262K 色彩
。背光: LED,自動或手動亮度調整,可在太陽下閱讀
。輸入裝置: 電阻性觸控螢幕及按鍵
測量功能
。測量單位: V/m, kV/m, A/m, W/m2, mW/cm2, uW/cm2, uT, mT, 高斯, % (依探棒而定)
。顯示測量範圍: 從 0.00001至 999’999 (依探棒與所選單位而定)
。更新率: 每秒 4 次
。結果形式: rms 瞬時值及峰值, 3軸總量值及各軸分量值
。時間平均: 可選從 1 秒至 24小時的移動視窗之 rms值
。空間平均: 單次蒐集的平均值
。加權指數: 加權峰值的計算是根據Icnirp 1998 民眾限制值標準,Icnirp 2010 工作環境標準,及2013/35 / EU 指令; 主要國際標準
。最大值保持: rms 瞬時值及最大加權指數值的顯示
。組合模式: 電場及磁場值 的同時 顯 示( 系 列 33 探棒 )
。時間測量: 最小(達500ns)及最大脈衝寬度測量及占空比計算
詳細規格、配件軟體及選購,歡迎洽詢。
General Specification
Battery: LiPo rechargeable
Operation time: > 24 hours (backlight and external accessories off)
Charging time: 3 hours
Battery level indication: Percentage indicator
Integrated sensors: Humidity (accuracy ±2%) and temperature (accuracy ±0.2°C)
Operating temperature: -10 °C to +50 °C
Storage temperature: -20 °C to +70°C
Humidity: 5 to 95%, non-condensing
Size (h x w x d): 170 x 85 x 31 mm (without probe)
Weight: 650 g (including battery without probe)
Country of origin: Italy
Frequency range
Selective mode: DC – 1 MHz
Wide Band mode: 100 kHz – 40 GHz
Operation Interface
Graphic display: 4.3” TFT, 272 x 480 pixel, 262K color
Backlight: LED, automatic or manual intensity adjustment, readable in the sun
Input devices: Resistive touch screen and keypad
Measurement Functions
Measurement units: V/m, kV/m, A/m, W/m2, mW/cm2, uW/cm2, uT, mT, Gauss, % (depending on the probe)
Display measurement range: From 0,00001 to 999’999 (depending on the probe and on the selected unit)
Refresh period: 4 times per second
Result types: r.m.s. instantaneous and peak, isotropic and individual Cartesian components
Time average: r.m.s. value on a moving window selectable from 1 sec to 24 hours
Space average: Single acquisitions average value
Weighted indexes:
Weighted peak calculated according to the limit levels set by the guidelines Icnirp'98 for the population, Icnirp’10 for the working environments, and by the directive
2013/35/EU for the lower, upper, localized levels; main international standards
Max Hold: Display of the r.m.s. instantaneous value and of the maximum weighted index value
Combined mode: Simultaneous display of electric and magnetic field values (Series 33 probes)
Time measurement: Minimum (up to 500 ns) and maximum pulse width measurement and duty cycle calculation