產品介紹∣可攜式多功能電力品質分析儀

為手持式多功能測量儀器，可精準測量單相、二相、三相系統的電壓、電流、功率、諧波失真及相角。
測量功能：
- 真有效值2通道電壓測量達600Vac。。
- 真有效值2通道電流測量達3,000Aac。
- U-U、I-I、U-I角度測量、相圖。
- 支援三相（Aaron）系統。
- 實功率、虛功率及視在功率、功率因數、cos φ、總諧波失真、頻率。
- 以200mA測試電流與極性切換，進行導體的導通性/電阻測量，並具備“通過（pass）/不通過（fail）”功能。
主要特點：
- 可在二相或三相系統，同步測量及顯示電壓、電流、相角與頻率。
- 可在小電流位準進行精準的相角測量。
- 配備大型明亮LCD顯示幕及大型按鈕，操作容易。
- 可儲存1,500個測量值。
- 安全：適用於CAT II / 600V環境。
- 可攜式：附提把的強固可攜式機箱與輕量的設計，可以輕鬆帶到不同的現場使用。
- 內建充電器及可充電NiMH電池。
- 可藉助Metrel EuroLink軟體及透過RS232或USB線，直接將測試結果下載到電腦。
典型應用：
- 適用於一般電氣系統的維護與調試、保護電驛測試、電氣機械維修或在電力接入口監測電力。
- 儀錶設備：測量相間電壓及單相電流幅值與相角。
- 結合電壓或電流源，也能成為測試及校正任何類型保護電驛的絶佳工具。

符合標準：
- 功能性：
  - IEC 61000-4-7。
  - IEC 61557-12。
- 電磁相容性：
  - IEC 61326-1。
  - IEC 61326-2-2。
- 安全性（LVD）：:
  - EN 61010-1。
  - EN 61010-031。
電壓測量範圍及基本精度：6V～600V；±（0.5% rdg.+3位數）。
電流，測量範圍及基本精度：
- A 1398 - 10A：0.1A～20A；±（1.5% rdg.+2位數）。
- A 1395 - 30A：3A～30A；±（1.5% rdg.+2位數）。
- A 1395 - 300A：30A～300A；±（1.5% rdg.+2位數）。
- A 1395 - 3000A：300A～3000A；±（1.5% rdg.+2位數）。
相角：
- 測量範圍：-180.0～+180.0。
- 基本精度：±0.5°。
詳細規格、配件、軟體與選購，歡迎洽詢。

MI 2230 VAFMeter is handheld multifunction instrument which can accurately measure voltage, current, power, harmonic distortion and phase angles in single, two and three phase systems.
Measuring Functions:
- TRMS Two channel voltage measurements, up to 600 Vac
- TRMS Two channel current measurements, up to 3000 Aac
- U-U, I-I, U-I angle measurement, phase diagram
- Support for three-phase (Aaron) systems
- Active, reactive and apparent power, PF, cos φ, THD, frequency
- Continuity/resistance of conductors with 200mA test current with polarity change and with pass/fail functionality
Key Features:
- Simultaneous measurement and display of voltage, current phase angles and frequency on two or three-phase systems
- Accurate phase angle measurement at low current levels
- Easy to use: large bright LCD display and large buttons enable easy handling of the instrument
- Memory storage for storing up to 1500 measurements
- Safe: built for CAT II / 600V environments
- Portable: rugged carrying case with a handle and lightweight design enable easy moving the instrument between sites.
- Built in charger & rechargeable batteries: instrument has a built-in charging circuit and comes with a set of rechargeable NiMH batteries.
- Downloadable: downloads test results via RS232 or USB cable directly to the PC with the help of the Metrel EuroLink software.
Typical Applications:
- VAFMeter instrument is designed to be used in general electrical systems maintenance and commissioning, protective relay testing, electrical machine repairs or in monitoring power at the electrical service entrance.
- For meter installations, unit measures phase-to-phase voltage and single-phase current amplitudes and phase angles.
- Combined with a voltage or current source, instrument also becomes an excellent tool for testing and calibrating virtually any type of protective relay.

Standards:
- Functionality:
  - IEC 61000-4-7
  - IEC 61557-12
- Electromagnetic compatibility:
  - IEC 61326-1
  - IEC 61326-2-2
- Safety (LVD):
  - EN 61010-1
  - EN 61010-031
Voltage Measuring Range and Basic Accuracy: 6 V ... 600 V; ±(0,5 % of reading + 3 digits
Current, Measuring range and Basic Accuracy:
- A 1398 - 10 A: 0.1 A ... 20 A; ±(1.5 % of reading + 2 digits)
- A 1395 - 30 A: 3 A ... 30 A; ±(1.5 % of reading + 2 digits)
- A 1395 - 300 A: 30 A ... 300 A; ±(1.5 % of reading + 2 digits)
- A 1395 - 3000 A: 300 A ... 3000 A; ±(1.5 % of reading + 2 digits)
Phase angle:
- Measuring range: -180.0 ... +180.0
- Basic accuracy: ±0.5°
Please feel free to contact for detailed specifications, accessories, software and options.