產品介紹∣微流體線上壓力感測器

大範圍內測量和控制壓力

特點

Elveflow的Flow Plus感測器用作錶壓力感測器，測量相對於大氣壓力的正壓。其MFP結構緊湊，易於清潔，不需要維護，易於安裝或整合到現有工廠。它的特點使它成為要求嚴格的微流體應用的強大和可靠的解決方案。

廣泛的介質相容性（FFKM）
FDA認證-適用於食品行業
線上式感測器
免維護，易於清潔
溫度補償
魯爾鎖式（Luer-lock）標準相容
整合測量放大器

MFP的優異性能

精確度－ 2 % 滿刻度
量程範圍－ 0到16 bar/過載25 bar
沒有死體積
流量－高達100 mL/min*
適用於氣體和液體
與Elveflow產品系列的其它儀器完全相容（MSR感測器讀取裝置和流量控制器（OB1，Cobalt））。

**取決於介質的粘度和初始壓力

壓力控制：

通過將任何壓力感測器與Elveflow的壓力控制器系統（OB1 MK4、Cobalt）相結合，您可以實現對實驗的精確壓力控制。 Elveflow ESI軟體會自動調整壓力以達到所需的流量。若想監測第三方儀器（如注射泵）壓力的研究人員可以將流量感測器接上Elveflow的微流體感測器讀取裝置（MSR）。

平滑、無脈動流量

Elveflow的所有的流量控制器系統（OB1 MK4，Cobalt）都可以與微流體壓力感測器結合。所使用ESI軟體的反饋迴路控制，您可以在設置的任何地方以穩定、無脈動和反應靈敏的方式精確監測和控制壓力。您可以直接將壓力值輸入軟體上，達到要求的數值。最重要是您可以將微流體壓力感測器隨意安裝在您的微流體設置中的任何位置。

工作原理

MFP的微流體壓力感測器用作錶壓力感測器，測量相對於大氣壓力的正壓和負壓。

large range pressure sensor

HIGHLIGHTS

Elveflow’s Flow Plus Sensor works as Gauge sensors, measuring positive relatively to atmospheric pressure. The MFP is compact, easy to clean, don’t require maintenance, easy to install or integrate in existing plants. Its features make it a robust and reliable solution for demanding microfluidic applications

Wide media compatibility (FFKM)
FDA-certified suitable for food industry use
Inline Sensor
No-maintenance and easy to clean
Temperature compensated
Polarization safe
Luer-Lock adapter
Integrated measurement amplification

Key performances

Accuracy up to 2 % Full Scale
1 range 0 – 16 bar / overload 25 bar
No dead volume
Flow rate up to 100 ml / min *
Compatible with gases and liquids
Fully compatible with other instruments from the Elveflow product line(MSR Sensor reader and Flow Controllers (OB1, Cobalt))

PRESSURE CONTROL:
You can achieve precise pressure control of your experiment by combining any Pressure Sensor with our pressure controller systems (OB1 MK4, Cobalt). The Elveflow ESI software automatically adjusts the pressure to reach the required flow rate.

Researchers who want to monitor the pressure of a third party instrument like a syringe pump can plug the flow sensor to our Microfluidic Sensor Reader (MSR ).

SMOOTH, PULSELESS FLOW
All our flow controller systems (OB1 MK4, Cobalt) can be coupled with the Microfluidic Inline Pressure Sensor. Using the feedback loop control of our ESI software, you can accurately monitor and control pressure anywhere in setup in a stable, pulseless and responsive fashion. Directly input the pressure into the software to reach the requested value.
The microfluidic pressure sensor can be plugged anywhere inline in your microfluidic setup.

Typical setup

The MFP pressure sensors work as Gauge pressure sensor, measuring positive pressure relatively to atmospheric pressure.