產品介紹∣捲對捲滾壓機
Search

捲對捲滾壓機
Roll to Roll Pressure Controlled Rolling Press

【Gelon】鋰電池製程設備與枆材 鋰電池製程設備

捲對捲滾壓機

簡介

GN-E2300B

GN-E2300B is an Automatic Battery Electrode Rolling Press System with precision digital pressure control in a compact footprint that is less than 6'x6'. It integrates tension controlled feeding and winding devices together with Rolling press machine to achieve attention-free electrode rolling & pressing up to 75 meters long with the 300mm max width. It is a perfect tool for building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries to prepare electrode sheets at consistent and repeatable rolling conditions.

我要諮詢

GN-E2300B is an Automatic Battery Electrode Rolling Press System with precision digital pressure control in a compact footprint that is less than 6'x6'. It integrates tension controlled feeding and winding devices together with Rolling press machine to achieve attention-free electrode rolling & pressing up to 75 meters long with the 300mm max width. It is a perfect tool for building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries to prepare electrode sheets at consistent and repeatable rolling conditions.

Working Voltage · 208 - 240 VAC, 50/60Hz, Single Phase
· 220V AC Power plug is not included .
Max. Power Consumption 2kW
Rollers (one pair) · Dimensions: 200mm (Dia.) x 330mm(W)
· Material: Hardening Toll Steel with HRC 60-62
· Effective Rolling Width: <250mm
Press gap · 0.050 - 1 mm adjustable by Dual micrometer knobs
· Tolerance: 0.003mm
Motor & Rolling Speed · 550W AC motor with frequency controller
·  1 - 6 Meter /Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness · 60-62 HRC
· Never roll materials with hardness >50HRC
Press Planeness  ±0.0025mm
Pressure Control · Pressure load: 1 - 25 Tons adjustable by Touch Screen Control Panel
· Real time pressure displays with data saving function
· Digital Pressure Gauge with RS-232 PC Port to show and record pressure change
· Software is available upon request at extra cost (+ $300)
Rectifying Sensor  Built in Rectifying Sensor to ensure neatly reeling electrode foil after pressing
Compressed air 60psi required (Air compressor is not included)
Rolling Unit Dimensions · Rolling Machine: 1200mm(L) x420mm(W) x 800mm(H)
· System with feeding & winding
Warranty · One year limited warranty with lifetime support
· Rusting and damage due to improper storage condition or maintenance are not covered by warranty

GN-E2300B is an Automatic Battery Electrode Rolling Press System with precision digital pressure control in a compact footprint that is less than 6'x6'. It integrates tension controlled feeding and winding devices together with Rolling press machine to achieve attention-free electrode rolling & pressing up to 75 meters long with the 300mm max width. It is a perfect tool for building prototypes (e.g. pilot scale studies) of new generation rechargeable batteries to prepare electrode sheets at consistent and repeatable rolling conditions.

Working Voltage · 208 - 240 VAC, 50/60Hz, Single Phase
· 220V AC Power plug is not included .
Max. Power Consumption 2kW
Rollers (one pair) · Dimensions: 200mm (Dia.) x 330mm(W)
· Material: Hardening Toll Steel with HRC 60-62
· Effective Rolling Width: <250mm
Press gap · 0.050 - 1 mm adjustable by Dual micrometer knobs
· Tolerance: 0.003mm
Motor & Rolling Speed · 550W AC motor with frequency controller
·  1 - 6 Meter /Minute adjustable by Touch Screen Control Panel
Roller Surface Hardness · 60-62 HRC
· Never roll materials with hardness >50HRC
Press Planeness  ±0.0025mm
Pressure Control · Pressure load: 1 - 25 Tons adjustable by Touch Screen Control Panel
· Real time pressure displays with data saving function
· Digital Pressure Gauge with RS-232 PC Port to show and record pressure change
· Software is available upon request at extra cost (+ $300)
Rectifying Sensor  Built in Rectifying Sensor to ensure neatly reeling electrode foil after pressing
Compressed air 60psi required (Air compressor is not included)
Rolling Unit Dimensions · Rolling Machine: 1200mm(L) x420mm(W) x 800mm(H)
· System with feeding & winding
Warranty · One year limited warranty with lifetime support
· Rusting and damage due to improper storage condition or maintenance are not covered by warranty