簡介
C-Flow LAB 1x1
- 可手工快速組裝且不需工具。
- 設計支架使拆卸與組裝更方便。
- 適用任何厚度介於微米至8豪米的電極材料。
- 可配置為雙槽或單槽的液流電池。
- 提供裁切交換膜與墊片的模版。
- 改良流量分配器和電極組件（已有專利）
C-Flow LAB 1x1的設計來自於我們多年為全球工業、研究和教育界人士設計和提供模組的經驗。
C-Flow LAB 1x1是手動組裝的實驗型電化學電池，電極面積為10 mm x 10 mm。它是專為實驗工作而設計的。從入口到出口的工作容量為1毫升電解質，非常適合處理稀有或昂貴的溶液。
特色
- 可手工快速組裝且不需工具。
- 設計支架使拆卸與組裝更方便。
- 適用任何厚度介於微米至8豪米的電極材料。
- 可配置為雙槽或單槽的液流電池。
- 提供裁切交換膜與墊片的模版。
- 改良流量分配器和電極組件（已有專利）
| 電極尺寸 | 10 mm x 10 mm |
| 單位高度 | 110 mm |
| 單位寬度 | 70 mm (95 mm with fittings) |
| 單位深度 | 60 mm (135 mm with fittings) |
| 單位重量 | 1200 g |
| 端版 | Laser-cut 304 stainless steel |
| 模組框架 | cPVC |
| 電極 | Flat plate carbon |
| 集電器 | Brass |
| 電解液端口 | PEEK fittings as standard |
C-Flow LAB 1x1 is a hand-assembly laboratory electrochemical cell with a 10 mm x 10 mm elec-trode area. It has been designed for experimental work with a working volume of 1 ml of electrolyte from inlet to outlet, ideal for working with exotic or expensive solutions.
The C-Flow LAB 1x1 benefits from our many years’ experience of designing and supplying cells to industrial, research and educational cli-ents throughout the world.
Features
- Quick assembly by hand; no tools needed
- A stand is provided for easy dismantling and assembly
- Accepts any electrode material of any thickness from microns up to 8 mm
- Configurable as divided or undivided flow cell
- Templates provided for easy cutting of membranes and gaskets
- Improved flow distributor and electrode assembly (patent applied for)
| Electrode dimensions | 10 mm x 10 mm |
| Unit height | 110 mm |
| Unit width | 70 mm (95 mm with fittings) |
| Unit depth | 60 mm (135 mm with fittings) |
| Unit weight | 1200 g |
| End-plates | Laser-cut 304 stainless steel |
| Cell frames | cPVC |
| Electrodes | Flat plate carbon |
| Current collectors | Brass |
| Electrolyte ports | PEEK fittings as standard |